Custom Manufacturing

3T-AM’s production pivot: repeat orders now account for about 70% of revenue

Ines FarkasNovember 16, 20265 min read0 views

At a glance

  • The Newbury metal additive manufacturer is trying to pair contracted production demand with the development work that still occupies most of its team.
  • 3T-AM commercial director Eddie Andrews says repeat production orders now generate around 70% of revenue, while new product introduction still takes about 80% of the team’s time. The company’s in-house machining, order-backed EOS printer purchases and SBO-supported expansion show how it is trying to make repeatable delivery, rather than one-off prototypes, the base of its business.
A multi-laser metal printer, CNC machining center and finished metal components are shown in a conceptual production cell connected by subtle digital documentation lines.

3T Additive Manufacturing’s move from prototype work to repeat production is not a single technology purchase. It is an operating-model change, according to commercial director Eddie Andrews. When he joined the Newbury company in November 2021, 3T-AM could make one-off metal parts for hundreds of customers. The harder problem was winning the same order again and delivering it at the agreed price and date. Five years later, Andrews estimates that around 70% of revenue comes from production, but new product introduction still takes roughly 80% of the team’s time.

From accumulated processes to repeatable delivery

Andrews dates the business to 1997 and recalls its first metal machine arriving around 2008. By the 2021 reset, years of accommodating individual prototype jobs had left process after process on the shop floor. 3T-AM narrowed its customer base, gave larger accounts more influence over what it developed and simplified procedures that had accumulated. Much of the work stayed manual while the team established which operations it could reliably repeat. A product owner now takes responsibility for the finished component, and print and machining specialists agree what condition a part should be in as it passes from one operation to the next.

Machining and ownership of the finished part

Andrews argues that a successful additive manufacturer must also be a strong CNC machining company. Bringing machining in-house gave the SME more control over costs, quality and delivery dates, while larger multi-laser machines improved productivity at the printing stage. Neither investment on its own could tell a customer when a finished part would arrive. Assigning ownership of the finished component and agreeing the condition of parts between operations connects printing and machining to a delivery promise.

Capacity is booked before machines arrive

Capacity now follows contracts. Previously, 3T-AM might have bought an EOS M400 to try a different material and see what business it could develop. Today, Andrews says, customer programmes account for the capacity of incoming machines before they reach the factory; he describes the investment as quite boring. Austrian precision manufacturing group SBO acquired 3T-AM in October 2025. The Newbury business had generated around £5 million in sales in 2024, and SBO brought experience in machining downhole drilling equipment, including components up to ten metres long. SBO approved a five-year plan and asked whether it could be done quicker. In August 2026, the group reported that 3T-AM had added an EOS M400 in the second quarter, ordered another printer and invested further in post-processing as part of a seven-printer expansion across UK and US operations. A full order book makes the next machine easier to justify, but it also leaves little time to qualify a different material or develop a new product. Andrews wants two distinct reasons to invest: contracted demand and work 3T-AM cannot yet offer.

Demand mix and the aerospace constraint

Semiconductor customers generate the strongest demand, followed by energy, then space and defence. Aerospace remains central to 3T-AM’s plans, but the company has found work for its machines while it waits for more aerospace programmes to reach suppliers at volume. A pre-pandemic aerospace enquiry illustrates the scale problem: one family of parts would have required 16 multi-laser systems to cover only a share of the requirement. From the buyer’s side, the question was how many suppliers had the floor space, capital and capacity to take it on. Andrews sees that as one reason original equipment manufacturers still keep sizeable additive programmes in-house.

What the customer can measure

For some customers, replacing a casting with a printed part earns its keep through lead time alone. A legacy or development programme can obtain a component sooner, even at much the same unit cost. At higher volumes the calculation gets tougher. Machine maintenance contracts and consumables weigh on the hourly rate, and a factory working a single shift has fewer productive hours over which to spread those costs. Andrews sees scope to learn from CNC shops that operate around the clock. One place he would look for automation is support removal, where the process can still depend on what an experienced operator knows about a particular job.

Aerospace LCA and digital product passports

A Honeywell Aerospace project will test another claim for additive manufacturing. Under an Aerospace Technology Institute-funded programme, the partners are converting an existing conventionally manufactured component to additive. The sustainability team at the NCC in Bristol is carrying out a 12-month life-cycle assessment covering manufacture, service and end of life. Printing closer to the finished shape should use less feedstock and leave less metal to machine away than starting with billet. The study will compare the two manufacturing routes alongside any benefit the redesigned component delivers in service. Separately, 3T-AM is connecting its factory and enterprise systems and developing digital product passports to document the carbon associated with making an individual component. By the end of 2028, Andrews wants that information to come with every part at no extra charge. For a customer compiling a supply-chain emissions report, it would become one more thing they could expect from a routine order.

Why the boring transition is the difficult one

The figures capture the tension in the transition: production supplies around 70% of revenue, while new product introduction still consumes about 80% of the team’s time. Repeat orders give 3T-AM room to choose which development jobs to take, even though some will never become production contracts. Andrews’s point is that a manufacturer has to take part in the development journey to find out. The production shift is therefore selective: use repeat work to fund and de-risk development, while accepting that machine capacity is tied to customer programmes. The test is whether in-house machining, product ownership, order-backed printer investment and, eventually, carbon documentation can make repeat orders predictable enough for purchasing departments. That is less visible than a new metal printer, but it is where additive manufacturing becomes general manufacturing.

Reported by Ines Farkas, Tool Quality and Sourcing Analyst.