Custom Manufacturing

AMTG Uses Three G2 Gantry 3D Printers to Print Mella Shopping Center Walls

Bianca RossiOctober 14, 20265 min read9 views

At a glance

  • A customer of the Florida-based printer maker deployed three synchronized G2 gantry systems in one coordinated workflow, but AMTG has not explained how the machines were coordinated.
  • AMTG says three of its G2 gantry construction 3D printers were used together to form the wall system for the Mella shopping center, spreading printing work across the building footprint instead of relying on one machine. The company disclosed no details of how the printers were synchronized and limited its own role to supplying the equipment, training and certification.
Three gantry-style construction 3D printers laying layered concrete wall sections across the footprint of a low-rise commercial building under soft daylight.

AMTG, a Florida-based manufacturer of construction 3D printers, has disclosed that three of its G2 gantry systems were used together to print the wall system for the Mella shopping center. The project, developed by an AMTG customer, applied the three synchronized machines in a coordinated workflow, with long wall sections, openings and architectural transitions formed directly during printing.

According to AMTG, spreading the work across several printers let the project team distribute production over the building footprint instead of depending on a single machine. The company describes the G2 as a high-reach gantry construction 3D printer intended for large building projects, built on a modular Cartesian structure that can be configured to match a building's geometry and site requirements.

Synchronization details remain undisclosed

AMTG has not said how the three printers were synchronized, including whether they ran simultaneously under centralized control or followed coordinated production schedules. The company's involvement in the project was limited to supplying the printing systems, operator training and equipment-operation certification. Structural design, materials and construction remained the responsibility of the customer's qualified professionals.

Beyond the G2, AMTG offers three construction 3D printer families. The R-Series covers road-mobile and tracked robotic systems intended for rapid deployment, the G-Series covers gantry printers for on-site construction, and the F-Series focuses on factory-controlled production of prefabricated components.

Construction 3D printing moves into conventional projects

Other examples show how contractors are folding the technology into established operations. In the United States, Alquist announced an expansion of its construction 3D printing activity through a partnership involving Walmart, construction firm FMGI and equipment supplier Hugg & Hall. The initiative spans more than a dozen commercial projects and includes equipment deployment, operator training and technical support.

In Germany, construction group Matthäi established a dedicated 3D printing division after completing a two-storey office building. Using a COBOD BOD2 printer, the company printed the building's walls in roughly 105 hours, while foundations, floors and roofing were finished with conventional methods.

Capacity and reach are also being pushed further. In France, the ViliaSprint² development used a COBOD BOD2 printer to construct a three-storey, 12-apartment residential building, printing its walls and load-bearing structure in 34 days against an initial estimate of 50 days; the project partners are planning a larger development with two printers operating simultaneously. In Australia, Luyten 3D introduced the ASCEND A27, a tower crane-mounted concrete 3D printer with a working radius of up to 45 meters, designed to cover larger construction footprints from a single installation point.

The examples share a common thread: rather than treating 3D printing as a standalone demonstration, contractors and equipment suppliers are slotting it into commercial workflows alongside established methods, with training, certification and technical support bundled into deployment.

Reported by Bianca Rossi, Fluid-Power Polymer Interface Editor.