Instruments & Meters

ETEL Launches METIS HP Air-Bearing Planar Platform for Step-and-Scan Semiconductor Work

Hana IshikawaOctober 18, 20265 min read8 views

At a glance

  • The HEIDENHAIN company's new full air-bearing platform pairs a multi-degree-of-freedom encoder with ±150 nm accuracy and a 4-DoF fine-control module for lithography and inspection.
  • ETEL has introduced the METIS HP, a full air-bearing planar platform for step-and-scan semiconductor applications such as direct laser writing and high-resolution optical inspection. The company cites ±150 nm mapped accuracy, ±150 nm dynamic straightness at up to 1 m/s, accelerations to 20 m/s² and support for panels up to 600 mm × 600 mm.
A conceptual rendering shows a precision air-bearing planar stage holding a large glass panel inside a cleanroom, with an encoder scale along the guideway and a fine-positioning module above the surface.

ETEL, part of HEIDENHAIN and a supplier of high-performance motion control components and complete motion platforms, has introduced the METIS HP, a full air-bearing planar platform designed for demanding step-and-scan semiconductor applications, including direct laser writing and high-resolution optical inspection systems. The company presents the product as a further step in its position in high-precision motion control, combining speed and stability with dynamic straightness and projected tool-point measurement capability.

At the centre of the METIS HP is a multi-degree-of-freedom (mDoF) HEIDENHAIN encoder, which the company says ensures accuracy without thermal drift. This architecture enables projected tool-point measurement, and ETEL controllers can emulate a transistor-transistor logic (TTL) position signal for use as a trigger event. ETEL describes this as an alternative to the classical interferometer used as an advanced trigger generator: with the METIS HP, no mirror has to be added to the carriage, and the company points to the absence of air lensing effects or air perturbation, together with lower cost.

The platform's stated performance figures are:

  • ±150 nm accuracy over the full XY stroke after mapping;
  • ±150 nm dynamic straightness at speeds up to 1 m/s;
  • dynamic capability reaching accelerations up to 20 m/s²;
  • support for panel sizes up to 600 mm × 600 mm;
  • a high-bandwidth 4-DoF module for fine control of the Z, tip, tilt and theta axes.

According to ETEL, these characteristics minimize turnaround time and thereby increase machine throughput in step-and-scan applications. For high-end inspection in advanced packaging, where rapid and precise focal-distance adjustments are required, the company presents the 4-DoF module as the basis for the fine control these tasks demand.

Stéphane Pellegrini, Product Manager at ETEL, said the platform builds on the company's long-standing expertise in high-precision platforms and provides the trajectory quality required for advanced optical processes. He added that its speed stability and dynamic straightness are intended to ensure consistent performance even at high scanning velocities, and that support for panel sizes up to 600 mm × 600 mm addresses the growing need for next-generation maskless lithography with large-area substrates.

The announcement focuses on the platform's encoder architecture, accuracy and dynamic specifications and on the application areas ETEL targets; the company does not disclose pricing, availability dates or independently verified performance data in the material provided.

Reported by Hana Ishikawa, Photometric Test and Procurement Editor.