Industrial Machinery

KraussMaffei Extrusion Develops Single-Stage PVC Roofing Membrane Process

Amara KovalenkoNovember 17, 20265 min read0 views

At a glance

  • The continuous PVC InlineMixing route removes separate dryblend mixing and targets lower energy, labor and space costs.
  • KraussMaffei Extrusion has developed PVC InlineMixing, a continuous single-stage process for PVC roofing membranes that replaces separate hot-cold mixing and extrusion. The company reports up to 75 percent lower energy consumption depending on formulation and site, along with lower capital and operating costs, and says the process is already running in an industrial reference line.
Conceptual cutaway of a continuous PVC roofing membrane line with gravimetric feeders, a twin-screw extruder and calender rolls forming a sheet.

KraussMaffei Extrusion has developed a continuous single-stage process, called PVC InlineMixing, for producing PVC roofing membranes. The system is designed to replace the conventional two-stage route in which PVC powder, plasticizers, additives and fillers are first combined batchwise in a separate hot-cold mixer to make a dryblend. After cooling and intermediate storage, that mixture is plasticized in a twin-screw extruder and formed into membrane.

In the new approach, all solid and liquid components are fed directly into the extruder through gravimetric dosing systems in the required proportions. Because the separate heating-cooling-mixing combination is no longer needed and the material is heated only once, KraussMaffei says energy consumption and energy costs can fall by up to 75 percent, depending on the formulation, system parameters and location.

Lower capital and operating costs

The company also points to lower capital expenditure, since manufacturers do not need to invest in a separate mixing combination. Eliminating that equipment reduces the space required for the overall line and lowers labor requirements. Maintenance costs are also expected to be lower because wear parts for the heating-cooling mixer are no longer needed. Combined with reduced operating costs, these factors are intended to improve overall cost-effectiveness and support a rapid return on investment.

Production flexibility is another stated advantage. Formulation adjustments and color changes can be made directly during operation through the integrated control system, according to KraussMaffei. This removes the need to prepare and store separate dryblend batches before production. Christopher Bartel, Head of Sales Flat & Foam at KraussMaffei Extrusion, said the process gives roofing membrane manufacturers lower production costs, greater flexibility and more efficient manufacturing, allowing them to respond faster to new requirements and adjust formulations during production while reducing energy and capital expenditure.

Validated on industrial formulations

The process was developed at the KraussMaffei Extrusion Technology Center in Laatzen and validated with industrial roofing membrane formulations. The trials used a co-rotating twin-screw extruder from the ZE 65 BluePower series, equipped with loss-in-weight feeders for all solid components and multiple liquid feeders for free-flowing formulation components. The ZE BluePower series has a Da/Di ratio of 1.65; the company says the combination of high torque and large free volume provides a wide process window for different formulations.

Tests confirmed what KraussMaffei describes as excellent gelation of the PVC and high product quality. The mechanical properties and weldability of the membranes also met industrial requirements, and the results were validated for several formulations. Bartel said the results demonstrate the potential of PVC InlineMixing for industrial roofing membrane production, and that the technology center works with customers to test specific formulations under production-relevant conditions, optimize the process and prepare for industrial implementation.

PVC InlineMixing is already in use in an industrial production line for PVC roofing membranes. The reference plant achieves a total throughput of 1,800 kg/h with two extruders and two calenders. In that line, PVC, additives and fillers, along with edge trimmings generated during production, are processed continuously into finished membranes.

KraussMaffei presents the development as a way to combine high product quality with a leaner production route. The claimed benefits remain company-reported and depend on formulation, equipment configuration and site conditions, but the reference installation shows that the concept has moved beyond laboratory validation into continuous industrial operation.

Reported by Amara Kovalenko, Forklift and Pallet Handling Analyst.